Pixhawk RPi CM4/5 Baseboard

Description The Holybro Pixhawk RPi CM4/5 Baseboard combines the Pixhawk FC module with the Raspberry Pi CM4/5 companion computer in a compact form factor with all the connections you need…

Specifications

Description The Holybro Pixhawk RPi CM4/5 Baseboard combines the Pixhawk FC module with the Raspberry Pi CM4/5 companion computer in a compact form factor with all the connections you need for your project. It follows the Pixhawk Connector and Bus Standard , allowing easy swapping of the FC Module with any FC that follows the Pixhawk Bus Standard. The FC Module is internally connected to RPi CM4/5 through TELEM2, and can also be connected via ethernet with an external cable provided. It is compatible with the Pixhawk 5X and 6X flight controller modules. Hint: This Pixhawk RPi baseboard supports Raspberry Pi CM4 and CM5. The CM5 requires more power, and the USB-C port used for flashing also powers the Pi. If your computer doesn’t provide enough power, use a powered USB hub for reliable flashing operation. Reference Link Connection & Ports RPi CM4/5 Flash Guide Dimension PM03 Wiring Guide Installation of Rasberry Pi CM4/5 User guide & other technical details can be found on our Documentation Page Here. Baseboard + Power Module Set Includes: Pixhawk RPi CM4/5 Baseboard Note : Does not include Flight Controller Module & RPi CM4/5 PM03D Power Module Pixhawk RPi CM4/5 Baseboard Cable Set Flight Controller + Baseboard + Power Module Set Includes: Pixhawk 6X Flight Controller Module PM03D Power Module Pixhawk RPi CM4/5 Baseboard Note: Does not include RPi CM4/5 Pixhawk RPi CM4/5 Baseboard Cable Set Recommend specification for RPi CM4/5: Wireless: Yes RAM: 4GB or higher eMMC: 16GB or higher Reference Reference blog on talking to PX4 with CM4/5 Baseboard