RP1 V2 ExpressLRS 2.4ghz Nano приёмник
Приёмники FPVThe RadioMaster RP series приёмники are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, и accurate signal reception, allowing для superior performance in demanding environments и enhancing…
Specifications
| SKU | HP0157.RX-RP1-V2 |
|---|---|
The RadioMaster RP series приёмники are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, и accurate signal reception, allowing для superior performance in demanding environments и enhancing the flight experience. The RP1 и RP2 2.4GHz ELRS nano series приёмники are open-source приёмники based on ExpressLRS. The Nano приёмники, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU и SX1280 RF chip. The RP1 has a UFL антенна socket для full-дальность антенна use. The RP2 has a built-in ceramic антенна which is super light и small in size и ideal для гонок. The RP1 и RP2 feature WIFI built in so you can апгрейд firmware by WIFI и configure the приёмник via the built-in WebUI с your PC or mobile phone. Thanks to the low-latency, high-refresh-rate RF модуль, the RP1 и RP2 deliver ultra-responsive performance. Their ultra-light, nano-sized design makes them suitable для a wide дальность of applications, fitting just about anywhere! Visit https://www.expresslrs.org/ to learn more. Features Improved PCB design is better для heat dissipation. Upgraded rigid антенна с greater durability и performance. LED on the top side of PCB. Solder pads are improved и easier to solder to. Built-in a TCXO (temperature compensated crystal oscillator) совместимый с all 2.4GHz ExpressLRS модули и передатчики с built in 2.4GHz ExpressLRS Specification Item: RP1 Nano ExpressLRS 2.4ghz приёмник Type: ISM MCU: EPS8285 RF Chip: SEMTECH SX1281 Telemetry RF power: 10mW антенна: 65mm 2.4ghz T антенна Frequency дальность: 2.404 – 2.479 Ghz Maximum receive refresh rate: 500Hz / F1000Hz Minimum приёмник refresh rate: 25Hz Working voltage: 5v Weight: 2.2g (Including антенна) Dimension: 13mm*11mm*3mm Firmware Version: ExpressLRS v2.4 pre-installed FW Target: RadioMaster RP1/2 2400 RX Bus interface: CRSF TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability и accuracy in frequency control, compensating для temperature variations. This results in consistent и reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability и preventing signal degradation. Click to learn more about the TCXO. Size Related Products UFL 2.4Ghz T антенна 65mm/95mm RP1 ExpressLRS 2.4ghz Nano приёмник RP2 ExpressLRS 2.4ghz Nano приёмник TX12 Mark II Radio TX16 Mark II Radio Zorro Radio Package Includes 1 * RP1 ExpressLRS 2.4ghz Nano приёмник 1 * 65mm UFL 2.4Ghz T антенна 1 * User Manual 1 * CRSF wire RP1 приёмник is installed с ExpressLRS as стандартный. ExpressLRS is an open-source, high-performance radio control link that delivers exceptional дальность и low-latency communication using advanced LoRa technology. It’s highly customizable и perfect для RC enthusiasts looking для reliability и efficiency. Pair your ExpressLRS с Radiomaster’s top-tier передатчики и приёмники. Radiomaster products are designed to maximize the benefits of ExpressLRS, offering state-of-the-art performance для your RC adventures. апгрейд your RC experience с the unbeatable combination of ExpressLRS и Radiomaster—engineered для excellence и tailored для you. Find out more about ExpressLRS here
