ER8G & ER8GV 2.4GHz ELRS PWM Receiver

The RadioMaster ER series of PWM receivers is built on the innovative ExpressLRS protocol. It provides high performance, dependable signal, versatile configuration, and quick response time, offering a new experience…

Specifications

The RadioMaster ER series of PWM receivers is built on the innovative ExpressLRS protocol. It provides high performance, dependable signal, versatile configuration, and quick response time, offering a new experience for your projects and applications. The ER8G & ER8GV receiver have been specially designed for pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use (only one voltage input can be used at the any given time). Both ER8G & ER8GV feature a dual-antenna with telemetry power up to 100mw and can be used with a 1S Lipo receiver battery. The ER8G Receiver has the same functionality as the ER8GV only without a built in Vario for competitions that prohibit the use of Vario or simply for users who do not need a vario on their receiver. Features Based on the Revolutionary ExpressLRS System High performance, high reliability, flexible configuration, low latency, and strong link quality Support 8 PWM Channels Optimized ground up PCB design Automatically voltage telemetry of external battery voltage or built-in receiver voltage ER8GV receiver is built-in high-precision air pressure sensor (Vario) Supports Wi-Fi updates and WEBUI configuration Reserve 4pin CRSF input port High quality 2.54 mm connector Standard 20 cm High Sensitivity Antenna For many applications Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS Specification (ER8G) Item: ER8G 2.4GHz ELRS PWM Receiver Power supply: DC 3.5 – 8.4V Antenna type: 20cm high sensitivity antenna Wireless protocol: ExpressLRS 3.3.0 pre-installed Output channel: 8CH PWM Serial Output: CRSF / Sbus Telemetry power : maximum 100mw (LUA can be set) Battery voltage detection range: DC 4.0 – 35V Weight: 12 grams Dimensions: 60*13.5*13mm Firmware: Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER8-G 2.4GHz Diversity+8xPWM RX Specification (ER8GV) Item: ER8GV 2.4GHz ELRS PWM Receiver Power supply: DC 3.5 – 8.4V Antenna type: 20cm high sensitivity antenna Wireless protocol: ExpressLRS 3.2 pre-installed Output channel: 8CH PWM Serial Output: CRSF / Sbus Return power: maximum 100mw (LUA can be set) Built-in high-precision air pressure sensor (Vario) Battery voltage detection range: DC 4.0 – 35V Weight: 12 grams Dimensions: 60*13.5*13mm Firmware: Device Category: Radiomaster 2.4Ghz / Device: RadioMaster ER8-GV 2.4GHz DiversitYy+8xPWM RX+Vario RX Size RadioMaster ER Series Receivers ER4 ELRS PWM Receiver ER6 ELRS PWM Receiver ER8 ELRS PWM Receiver ER6G/ER6GV ELRS PWM Receiver ER8G/ER8GV ELRS PWM Receiver Package Includes 1 * ER8G or E8GV 2.4GHz ELRS PWM Receiver 2 * Heat-shrink tube 1 * Voltage telemetry wire (Type-A) 1 * CRSF wire 1 * ELRS- RX- SBUS wire 1 * User Card ER8G & ER8GV Receiver is installed with ExpressLRS as standard. ExpressLRS is an open-source, high-performance radio control link that delivers exceptional range and low-latency communication using advanced LoRa technology. It’s highly customizable and perfect for RC enthusiasts looking for reliability and efficiency. Pair your ExpressLRS with Radiomaster’s top-tier transmitters and receivers. Radiomaster products are designed to maximize the benefits of ExpressLRS, offering state-of-the-art performance for your RC adventures. Upgrade your RC experience with the unbeatable combination of ExpressLRS and Radiomaster—engineered for excellence and tailored for you. Find out more about ExpressLRS here