GEPRC TAKER F722 BLS 65A V2 STACK

Features Uses the mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope 16M onboard black box storage Integrated LC filter Upgraded Type-C USB interface Directly plugs into the DJI Air…

Specifications

Features Uses the mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope 16M onboard black box storage Integrated LC filter Upgraded Type-C USB interface Directly plugs into the DJI Air Unit Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience Simple and efficient installation method with shock absorbers for stable gyroscope performance Dual independent BECs: [email protected] and 5V@3A Specifications GEPRC TAKER F722 BLS 65A V2 STACK FC model: GEP-F722-HD V2 Flight Controller MCU: STM32F722 IMU: ICM42688-P(SPI) Air Unit Connection: Direct plug-in to DJI Air Unit Black Box:16M onboard USB Interface: Type-C Barometer: supported OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A, [email protected] dual BEC Firmware Target: GEPRCF722 Dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage: 3-6S LiPo UART: 5 Power Filter: Integrated LC filter Weight: 8.1g ESC Model: TAKER H65_8S_BLS 65A 4IN1 ESC Input Voltage: 3-8S Lipo Ammeter: Supported Continuous Current: 65A Burst Current: 70A (5 seconds) Support Protocol: Dshot 150/300/600 Dimension: 42×45.7mm,mounting hole size30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 14.9g Firmware Target: B_X_30 Includes 1 x FC board 1 x ESC board 1 x Capacitor 1 x DJI Air Unit adapter cable 1 x Flight controller adapter cable 1 x XT60 power cable 4 x M3*30 screws 4 x M3*25 screws 8 x Nylon nuts 8 x Silicone anti-shake pads 2 x sh1.0 4pin silicone cable 1 x Camera connection cable