GEPRC TAKER F722 BLS 80A V2 STACK

Features Use mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With…

Specifications

Features Use mainstream STM32F722 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With TAKER H80_BLS 80A 4IN1 ESC, Dual MOS, high current, silky flight Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably [email protected] + 5V@3A dual independent BEC Specifications GEPRC TAKER F722 BLS 80A V2 STACK FC model: GEP-F722-HD V2 Flight Controller MCU: STM32F722 IMU: ICM42688-P(SPI) Air Unit Connection: Direct plugging into DJI Air Unit Black Box: 16M onboard USB Interface: Type-C Barometer: support OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A, [email protected] dual BEC Firmware Target: GEPRCF722 Size: 36.85×36.85mm, hole 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle. Input Voltage: 3-6S LiPo UART: 5 Power Filter: Integrated LC filter Weight: 8.1g ESC Model: TAKER H80_BLS 80A 4IN1 ESC Input Voltage: 3-6S Lipo Ammeter: Support Continue Current: 80A Burst Current: 85A (5 second) Support Protocol: Dshot 150/300/600 Size: 56.3*61.1mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 28.1g Target: B_X_30 Includes 1 x GEP-F722-HD V2 Flight Controller 1 x TAKER H80_BLS 80A 4IN1 ESC 1 x Filter board(Dual 50V 2200uF) 1 x DJI connection cable(SH1.0 6pin 100mm) 1 x FC adapter cable(SH1.0 8pin 30mm) 1 x Receiver silicone cable(SH1.0 4pin 150mm) 1 x Camera connection cable(SH1.0-SH1.25 3pin 60mm) 1 x VTX connection cable(SH1.0 4pin-6pin 100mm) 1 x XT90 battery plug 1 x Red and black power cable(10AWG 240mm) 4 x M3*30 screws 4 x M3*25 screws 8 x Nylon nuts(M3) 12 x Silicone anti-shake pads(M3)