RP2 V2 ExpressLRS 2.4ghz Nano приёмник
Приёмники FPVThe RadioMaster RP series приёмники are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, и accurate signal reception, allowing для superior performance in demanding environments и enhancing…
Specifications
| SKU | HP0157.RX-RP2-V2 |
|---|---|
The RadioMaster RP series приёмники are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, и accurate signal reception, allowing для superior performance in demanding environments и enhancing the flight experience. The RP1 и RP2 2.4GHz ELRS nano series приёмники are open-source приёмники based on ExpressLRS. The Nano приёмники, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU и SX1280 RF chip. The RP1 has a UFL антенна socket для full-дальность антенна use. The RP2 has a built-in ceramic антенна which is super light и small in size и ideal для гонок. The RP1 и RP2 feature WIFI built in so you can апгрейд firmware by WIFI и configure the приёмник via the built-in WebUI с your PC or mobile phone. Thanks to the low-latency, high-refresh-rate RF модуль, the RP1 и RP2 deliver ultra-responsive performance. Their ultra-light, nano-sized design makes them suitable для a wide дальность of applications, fitting just about anywhere! Visit https://www.expresslrs.org/ to learn more. Features Improved PCB design is better для heat dissipation. LED on the top side of PCB. Solder pads are improved и easier to solder to. Built-in a TCXO (temperature compensated crystal oscillator) совместимый с all 2.4GHz ExpressLRS модули и передатчики с built in 2.4GHz ExpressLRS Specification Item: RP2 Nano ExpressLRS 2.4ghz приёмник Type: ISM MCU: EPS8285 RF Chip: SEMTECH SX1281 Telemetry RF power: 10mW антенна: On Board SMT антенна антенна: 65mm 2.4ghz T антенна Frequency дальность: 2.404 – 2.479 Ghz Maximum receive refresh rate: 500Hz/F1000Hz Minimum приёмник refresh rate: 25Hz Working voltage: 5v Weight: 0.55g (On Board антенна) Dimension: 13mm*11mm*7mm Firmware Version: ExpressLRS v2.4 pre-installed FW Target: RadioMaster RP1/2 2400 RX Bus interface: CRSF TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability и accuracy in frequency control, compensating для temperature variations. This results in consistent и reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability и preventing signal degradation. Click to learn more about the TCXO. Size Related Products UFL 2.4Ghz T антенна 65mm/95mm RP1 ExpressLRS 2.4ghz Nano приёмник RP2 ExpressLRS 2.4ghz Nano приёмник TX12 Mark II Radio TX16 Mark II Radio Zorro Radio Download RP1 приёмник User Manual RP2 приёмник User Manual RP3 приёмник User Manual Package Includes 1 * RP2 ExpressLRS 2.4ghz Nano приёмник 1 * User Manual 1 * CRSF wire RP2 приёмник is installed с ExpressLRS as стандартный. ExpressLRS is an open-source, high-performance radio control link that delivers exceptional дальность и low-latency communication using advanced LoRa technology. It’s highly customizable и perfect для RC enthusiasts looking для reliability и efficiency. Pair your ExpressLRS с Radiomaster’s top-tier передатчики и приёмники. Radiomaster products are designed to maximize the benefits of ExpressLRS, offering state-of-the-art performance для your RC adventures. апгрейд your RC experience с the unbeatable combination of ExpressLRS и Radiomaster—engineered для excellence и tailored для you. Find out more about ExpressLRS here
