GEPRC TAKER F405 BLS 60A V2 STACK

Features Use mainstream STM32F405 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With…

Specifications

Features Use mainstream STM32F405 chip Equipped with the latest 42688-P gyroscope 16M black box storage Integrated LC filter Upgrade type-C USB interface Directly plugged into the DJI Air Unit With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably [email protected] + 5V@3A dual independent BEC Specifications GEPRC TAKER F405 BLS 60A V2 STACK FC model: GEP-F405-HD V3 Flight Controller MCU: STM32F405 IMU: ICM42688-P(SPI) Air Unit Connection: Direct plugging into DJI Air Unit Black Box: 16M onboard Barometer: BMP280 Motor outputs: M1-M6 USB Interface: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A, [email protected] dual BEC Firmware Target: GEPRCF405 Mounting: 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle Input Voltage: 3-6S LiPo UART: 6 UARTs Power Filter: Integrated LC filter Weight: 7.3g ESC Model: TAKER H60_BLS 60A 4IN1 ESC Input Voltage: 3-6S Lipo Ammeter: Support Continue Current: 60A Burst Current: 65A (5 second) Support Protocol: Dshot 150/300/600 Size: 42×45.7mm, hole30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring. Weight: 14.9g Target: B_X_30 Includes 1 x Flight Controller 1 x ESC 1 x Capacitor 1 x DJI Air Unit Adapter Cable 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x M3*30 Screws 4 x M3*25 Screws 8 x Nylon nuts 8 x Silicone grommets 2 x sh1.0 4pinsilicone cable 1 x Camera connection cable