BETAFPV Meteor75 Pro P1 Guide: Specs, Weight & Flight Time
The BETAFPV Meteor75 Pro P1 is a 37.5g bind-and-fly 1S whoop that records and transmits genuine 1080p video at 60fps through the P1 Air Unit, flies for 5:30 on a LAVA II 1S battery, and costs $129.99 ready to fly. It pairs the 80.8mm Meteor75 Pro frame with the Matrix 1S 3IN1 HD flight controller, updated 1102 21000KV/18000KV motors and Gemfan 45mm props, and it binds to the VR04 HD goggles out of the box. This guide breaks down the real specs, how the power system handles the weight of an HD air unit, and which pilots this whoop actually suits.
What Exactly Is the Meteor75 Pro P1?
The Meteor75 Pro P1 is BETAFPV’s flagship 1S HD whoop in the ArtLynk protocol family. “75 Pro” refers to the proven 80.8mm-wheelbase brushless frame with transparent gray canopy parts; “P1” refers to the integrated P1 Air Unit HD VTX and its matching P1 camera. Unlike a build-it-yourself kit, this is a fully assembled BNF: the air unit, the flight controller, the ELRS 2.4G receiver, motors and props are pre-installed and pre-tuned, so the only remaining step is binding to the VR04 HD goggles and flying. The same open ArtLynk ecosystem also connects the Aquila20 P1 and third-party gear such as the HGLRC Draco — our Aquila20 beginner guide covers that side of the family in depth.
Meteor75 Pro P1 Specifications at a Glance
| Item | Spec |
|---|---|
| Wheelbase | 80.8mm |
| Weight | 37.5g |
| VTX | P1 Air Unit, 1080p @ 60fps, ~60ms latency, 200mW, 5km+ range |
| Camera | P1 Camera, 1/2.9″ CMOS, 170° FOV |
| FC | Matrix 1S 3IN1 HD FC (FC + 12A ESC + ELRS 2.4G RX) |
| Motors | 1102 21000KV / 18000KV (2026 revision) |
| Props | Gemfan 45mm 3-blade |
| Battery | LAVA II 1S 580mAh / 680mAh |
| Flight time | 5:30 |
| Canopy | 2.5g injection-molded HD canopy, 0–45° camera angle |
| Price (BNF) | $129.99 |
How Good Is the HD Video on a 37.5g Whoop?
The P1 Air Unit is the same hardware we measured in the standalone P1 Air Unit guide: 1080p at 60fps with roughly 60ms of glass-to-glass latency, 200mW output that BETAFPV’s open-field testing pushed beyond 5km, and a 1/2.9″ CMOS sensor with a 170° field of view. On the Meteor75 Pro P1 the air unit arrives tuned for the whoop’s weight, with PID optimization for cinematic cruising and light freestyle. OSD data renders in Canvas mode through the flight controller rather than a character overlay, so the image stays clean at bitrates up to 20Mbps.
One practical note on range: the 5km figure comes from BETAFPV’s own open-area testing at full power. Around buildings or trees, expect less — but Standby Mode automatically adjusts transmission power to the distance between goggles and drone, which keeps the link recoverable after a distant crash without burning battery at full output all flight.
Is the Matrix 1S 3IN1 HD FC Powerful Enough?
The Matrix 1S 3IN1 HD FC stacks a flight controller, a 12A continuous ESC and an onboard Serial ELRS 2.4G receiver into one board designed exclusively for digital FPV — there is no analog OSD circuitry taking space or weight. A newly developed BEC keeps the digital link stable during hard punches, which matters because voltage sag on a single 1S cell is the classic failure mode of HD whoops.
The power system is the second half of that answer. The 1102 motors now ship as 21000KV/18000KV — a July 2026 revision from the earlier 22000KV that BETAFPV states does not change flight performance — spinning Gemfan 45mm 3-blade props on LAVA II 1S 580mAh or 680mAh packs. The result is a whoop that carries the P1 Air Unit without feeling sluggish and still lands 5:30 of flight time. For context, that is roughly three extra minutes compared with typical 1S HD whoops of the previous generation that barely cleared 2:30–3:00 under a digital VTX load.
How Does It Compare with the Aquila20 P1 and Meteor75 Pro II?
BETAFPV now sells two ArtLynk BNF quads and one DJI O4 line, and the differences come down to battery philosophy and flight character:
| Spec | Meteor75 Pro P1 | Aquila20 P1 | Meteor75 Pro II (O4) |
|---|---|---|---|
| Ecosystem | ArtLynk (open) | ArtLynk (open) | DJI O4 |
| Video | 1080p/60fps, ~60ms | 1080p/60fps (P1 HD version) | O4 HD feed |
| Battery | 1S 580/680mAh LAVA II | 2S HV 1100mAh | 1S–2S per version |
| Flight time | 5:30 | ~10 min | varies by version |
| BNF price | $129.99 | $138.99 | see product page |
In practice: the Meteor75 Pro P1 is the lightest and most indoor-friendly of the three, best for cine-style cruising around a house or office. The Aquila20 trades weight for 2S endurance and outdoor stability, stretching to around ten minutes per pack. The Meteor75 Pro II sits in the DJI O4 ecosystem — the right choice if you already own DJI goggles, though our Meteor Pro II comparison guide shows its 65mm and 75mm versions target different flight styles. If you fly analog-to-HD upgrades on a budget and want goggles included in the ecosystem rather than a $300+ DJI headset, the P1 line is the entry point.
What About Firmware and ArtLynk Compatibility?
ArtLynk is an open protocol built on Artosyn’s AR803X chipset, and BETAFPV documents cross-brand compatibility explicitly. To mix equipment — for example pairing the Meteor75 Pro P1 with an HGLRC Draco receiver or third-party goggles — both sides need firmware V2.0.5 or later. That version is not backward compatible with V1 releases (V1.0.36 / V1.0.44): a V1 ground station and V1 air unit must both be updated to V2, and mixed V1/V2 setups require updating the older side first. The air unit itself is flashed through the ground station, so keep goggles and air unit on matching versions before you attempt an update. Fly both-stock, however, and no firmware work is needed at all — the BNF and VR04 HD ship compatible.
Who Should Buy the Meteor75 Pro P1?
Choose the Meteor75 Pro P1 if you want HD video in the smallest practical package, fly mostly indoors or in tight spaces, and value a true bind-and-fly experience with the VR04 HD goggles. Its 37.5g all-up weight and 1S battery make crashes cheap and property-safe, while 1080p/60fps recording means the footage is usable for social clips, not just live viewing. Skip it if you need long outdoor endurance (Aquila20’s 2S fits better) or if you are already invested in DJI goggles (the O4-based Meteor75 Pro II integrates there). Radio options — LiteRadio 3 Pro, 3 or 2 SE — cover first-time pilots and pinch-grip veterans alike.
Setup: From Box to First Flight
The box includes the quad, four spare Gemfan props, a Type-C to SH1.0 adapter, an SH1.0 4-pin cable, mounting screws, decorative canopy panels and the P1 Air Unit manual. Setup is short: charge a LAVA II 1S pack, bind the quad to the VR04 HD goggles (bind-and-fly ready, no configuration), set your ELRS binds with a LiteRadio transmitter, and check the camera tilt — the canopy adjusts from 0° to 45° to match your flying speed. The 2.5g injection-molded canopy is heat-resistant and impact-tolerant, and the decorative panels snap on for a custom look. Replacement frames and panels are inexpensive, so early indoor sessions cost little.
Frequently Asked Questions
How long does the Meteor75 Pro P1 fly on one battery?
BETAFPV rates 5:30 of flight time on the recommended LAVA II 1S 580mAh or 680mAh packs. Aggressive freestyle throttling will shorten that; gentle cine cruising tends to reach or slightly exceed the rated figure.
Does the Meteor75 Pro P1 work with DJI goggles?
No. The P1 Air Unit uses the open ArtLynk protocol, so the matching headset is the BETAFPV VR04 HD goggles or other ArtLynk-compatible equipment once both sides run firmware V2.0.5 or later. For DJI O4 integration, the Meteor75 Pro II line is the correct product.
What is the difference between the 21000KV and 18000KV motor versions?
Both 1102 motor options are listed for the same quad, and as of July 2026 the previous 22000KV motor was replaced by the 21000KV/18000KV pair with no change in flight performance. Higher KV favors responsiveness on lighter setups; the BNF is tuned for whichever pair is installed.
Can I update the firmware myself?
Yes, but follow the documented order: the ground station (goggles) and air unit must be on matching major versions, and the air unit is updated via the ground station. Never mix V1 (V1.0.36 / V1.0.44) with V2.0.5+ equipment — update the older side first or you will lose the video link.
Is the Meteor75 Pro P1 suitable for complete beginners?
Largely yes: it binds and flies with no configuration, the 37.5g weight makes indoor crashes harmless, and spare props and canopy panels cost little. Total beginners should still start in a large open room and consider the simulator-first approach from our Aquila20 guide.
Conclusion: A Complete 1S HD Whoop for Everyday Flying
The Meteor75 Pro P1 packages a genuine HD stack — P1 Air Unit, Matrix 1S 3IN1 HD FC, 1102 motors, LAVA II batteries — into a 37.5g BNF that flies 5:30 and costs $129.99. For indoor cine flying and casual freestyle in the open ArtLynk ecosystem, it is currently the most complete turnkey option BETAFPV sells. The Meteor75 Pro P1 BNF and the VR04 HD FPV goggles are in stock now — grab the pair and you are flying HD the same afternoon.