PMW3901 Optical Flow Sensor
Other Drone AccessoriesProduct Description: The Holybro PMW3901 Optical Flow Sensor is a UART version of PMW3901 module with built in BEC. It comes pre-solder with 6pin JST GH connector made to connect…
Specifications
| Default Title | |
| SKU: 19005 | |
| $20.59 | |
| Autopilots & Peripherals | |
| Sensor |
Product Description: The Holybro PMW3901 Optical Flow Sensor is a UART version of PMW3901 module with built in BEC. It comes pre-solder with 6pin JST GH connector made to connect right to TELEM ports on most flight controller. Compatible with PX4 (PX4 Guide) & Ardupilot (Data format same as discontinued product CX-OF ). T echnical details: Dimension: 14x11x5mm Weight: 0.6g Interface: UART Baud rate: 19200 FPS: 95hz Power: 3.3~5.2V Current: 10mA Data Format: byte0: header (0xFE) byte1: number of data bytes (0x04) byte2: x-motion high byte byte3: x-motion low byte byte4: y-motion high byte byte5: y-motion low byte byte6: checksum byte7: surface quality byte8: footer (0xAA) Reference Link PX4 Guide Ardupilot Wiki Package Included 1x PMW3901 1x GH6P 170mm Cable(installed) 1x TPU Protective Case Shell
Related Products
ST VL53L1X Lidar
Gemfan 3016-3 Toothpick Props
HGLRC Tuning adapter USB Transfer Extension Cable Module for Flight Controller
M2/M3 screw
Aquila16 Exclusive Battery (2PCS)
Pavo Series Battery Strap (2PCS)
LAVA 4S 850mAh LiPo Battery
GEPRC RX as TX JR-Bay Modification Kit
Nano M8 5883 GPS Module
H-RTK F9P Rover (IST8310 Compass)
